Simply follow the cabling steps above to set up your ADSL broadband service. If you purchased your FRITZ!Box from Internode, your router has been pre-configured. The following steps only apply if your FRITZ!Box is not already configured, or if it has been reset to factory default settings. Setting the language, region, and password for your FRITZ!Box Connect the small, grey end of the 'Y' cable (labelled DSL) to the telephone port on the wall.įigure 3: Cabling for a Naked ADSL connection.Connect the power supply to the back of the router, and plug it into your 240v power outlet.Ĭabling for Naked ADSL and FRITZ!Box 7360.Connect the other end to one of the LAN ports on the back of the router. Connect one end of the supplied Ethernet cable to the network port on your computer.Connect the remaining small end of the 'Y' cable (labelled DSL) to the ADSL Modem port on the ADSL splitter.Connect the small, black end of the 'Y' cable (labelled Tel) to the Local Phone port on the ADSL splitter.Connect the larger ( RJ45) end of the 'Y' cable to the DSL/TEL port on the router.Please note that the following does not apply for the 7360. RJ45 to RJ11 adapters are included and must be used to connect the 'Y' cable to your ADSL splitter.įigure 2: Typical cabling for a FRITZ!Box 'Y' cable NOTE: Initial shipments of FRITZ!Box units had RJ45 plugs on the included 'Y' splitter.

If you have a FRITZ!Box 7360 it will be a straight cable, as the 7360 does not support landline phone calls - this cable should connect only to the DSL socket on the filter. Each unit includes an all-in-one version of the 'Y' cable without separate adapters. The FRITZ!Box uses a RJ45-style connection for the ADSL port on the back of the device. FRITZ!Box Cable Setupįigure 1: The ports on a FRITZ!Box 7490 router. Not what you're looking for? Try the FRITZ!Box guides for manual ADSL setup, NodePhone VoIP, or Wireless configuration. In this case, simply follow the cabling setup section below, then test your connection. If you purchased your FRITZ!Box from Internode as part of a new broadband service, we've already configured your username, password, and other settings.

Using the setup wizard to configure your Wireless network.

Using the setup wizard to configure NodePhone VoIP.

Using the setup wizard to configure your ADSL connection.

Setting the language, region, and password for your FRITZ!Box.

This guide is suitable for FRITZ!Box 7490, 7390, 7360, and 7272 routers using the latest FRITZ!OS firmware.

Fritzbox telnet deletebyindex